Products > Model 100 > Operations and Maintenance Operations Lift operations are simple ... To lower the lift, first walk around the lift, looking for possible obstructions above and below the lift. Once clear, insert the key into the controller. Turn the key to the up position to raise the lift off the locks. Turn the lock handle to release the locks on all four posts, then turn the key to the down position to lower the lift. Once completed, remove the key. It takes approximately 45 seconds to lower 6 feet. To raise the lift, first walk around the lift, looking for possible obstructions. Once clear, insert the key and turn to the up position until the lift is one foot off the ground. Then walk around the table a second time, visually inspecting to ensure it is balanced, stable and free from overhanging objects. Turn the key to the up position to raise the lift to slightly above the desired height, then turn the key to the down position to rest the table on the storage locks. Once completed, remove the key. Maintenance The lift is almost maintenance free. If used once a day or less, maintenance consists of performing a detailed inspection of the lift every six month.  Prev. Next  Home | Products | Request Info. | Contact Us | About Us | Site Map ©2004 Apex Storage Lifts, Inc.